# ESP32 firmware (ZX Evolution / TS-Conf ZiFi32 module)

Compiled firmware for the ESP32-S3-based WiFi/SPI module used by the ZX
Evolution / TS-Conf ("Pentevo") platform.

**Base source**: this firmware is based on
[tslabs/zx-evo](https://github.com/tslabs/zx-evo/tree/master/pentevo/esp32) —
full source for this fork lives in `pentevo/esp32/src` alongside this folder;
this `firmware/` directory only holds ready-to-flash binaries.

## Requirements

The ZX Evolution/TS-Conf board's own core firmware must be built with
**VDAC2** and **ESP32 (ZiFi32)** peripheral support enabled - without both,
the core won't recognize the ESP32 module on the SPI bus at all (no matter
how correct this ESP32-side firmware is), and won't drive the FT8xx video
chip either. Check this before assuming a connection problem is on the
ESP32 side.

The **RESET jumper on the IDE connector must be installed** as well - see
`../hardware/connection_diagram.webp`.

## What's changed vs. the upstream source

Most of the work in this fork is a **VFS bridge that exposes the ZX
Evolution's real SD card as a network share over SMB2/3**, so any Windows/
macOS/Linux SMB client can browse, download, upload to, and delete files on
the real Wild Commander filesystem without pulling the card. This is still
**actively being worked on** — see "Status" below.

Changes so far, roughly in the order they were made:

- **Real filesystem wired up.** `vfs_bridge.cpp`'s SMB2 handlers
  (CREATE/READ/WRITE/CLOSE/QUERY_DIRECTORY/QUERY_INFO/etc.) now talk to the
  real filesystem via a small request/response bridge (`vfs_request.cpp`)
  over the existing SPI link to the Z80 side, instead of the original
  hardcoded demo filesystem.
- **Upload (WRITE) and delete support** for files and empty directories,
  including proper `FILE_DELETE_ON_CLOSE` handling and a
  `SMB2_STATUS_DIRECTORY_NOT_EMPTY` reply when a non-empty directory delete
  is rejected.
- **Directory listing fixes**: `SMB2_RETURN_SINGLE_ENTRY` pagination support
  (needed by `cmd.exe`'s own SMB2 client, not just Explorer), the missing
  non-"ID" directory info classes, synthesized `.`/`..` entries, and a
  `NextEntryOffset` encoding bug in the vendored `libsmb2` that silently
  corrupted any listing past the second entry.
- **`srvsvc` share-enumeration fix**: the RPC pipe used to always report the
  Phase-1 placeholder share name `"test"` regardless of what a client had
  actually connected to — fixed to report the real share name.
- **Added `SMB2_FILE_FS_VOLUME_INFORMATION`** support (a bare `dir`/`net use`
  needs it; Explorer doesn't ask for it, which is why this was missed at
  first).
- **Stability fixes**: a NULL-pointer crash in the named-pipe RPC transceive
  path, and a 0-length SPI DMA transaction that could wedge the whole SPI
  channel to the Z80 side.
- **`libsmb2` (vendored, `src/third_party/libsmb2`) patches**:
  - `SMB2_FSCTL_DFS_GET_REFERRALS` now answers `STATUS_OBJECT_PATH_NOT_FOUND`
    instead of `STATUS_NOT_IMPLEMENTED` — the wrong status code was sending
    Windows Explorer into a retry storm before it would even attempt to
    connect to the share.
  - `SET_INFO` parsing is now permissive for info classes this server
    doesn't specifically implement (passes the raw buffer through instead of
    failing to parse) — a hard parse failure here used to tear down the
    *entire* TCP connection instead of just failing that one request, which
    showed up as Explorer aborting mid file-copy with a generic error.
  - A `close_cmd` return value of `-2` now maps to
    `SMB2_STATUS_DIRECTORY_NOT_EMPTY` in the CLOSE reply instead of a generic
    `STATUS_NOT_IMPLEMENTED`.
- **Auth simplified** to plain guest/anonymous sessions (`authorize_handler`
  always succeeds) — an earlier attempt at forcing NTLMv2 + SMB2 signing
  turned out to be unrelated to a since-fixed listing bug, so it was backed
  out rather than kept as unnecessary complexity.
- Removed high-frequency per-request debug logging that was originally added
  to chase the above bugs, replaced with a single per-connection summary
  line.

## Status

The SMB2/3 server (read, browse, upload, delete) works against real Windows/
Samba clients. **This is still in-progress work** — directory/file creation
(`MKDIR`) isn't implemented yet, overwriting an existing file with shorter
content doesn't truncate the old tail, and there's no live-update
(`change_notify`) support, so Explorer can show a stale listing for a moment
after a change until it's refreshed. See the source tree's own code comments
for the current state of any specific handler.

## Flashing

Target chip: **ESP32-S3**. Using `esptool.py` directly:

```bash
esptool.py --chip esp32s3 -p COM5 -b 460800 write_flash \
  --flash-mode dio --flash-freq 80m --flash-size detect \
  0x0     bootloader.bin \
  0x8000  partition-table.bin \
  0x10000 esp-spi.bin
```

(replace `COM5` with the actual port; `flasher_args.json` in this folder has
the same offsets in `idf.py`'s own JSON format, for reference or scripting.)

If you're building from source instead: ESP-IDF **v6.1** (not `v6.1-rc1`) —
`idf.py build flash`.

## Hardware

See `../hardware/` for:
- `connection_diagram.webp` — how this module wires up to a ZX Evolution
  board.
- `pcb_photo.jpg` — a photo of the adapter board.
- `gerber/` — Gerber files for the adapter PCB.